The JHM110X is a highly stable and reliable signal conditioning integrated circuit designed for differential resistive bridge sensor signals. Measured and correct bridge values are provided at SO pin, which can be configured as an analog voltage output or as a single-wire digital output.
For bridge sensor signals, the JHM110X performs high accuracy amplification and 14-bit A/D conversion, with amplifier gains and ADC input range offset configurable. A temperature signal from an on-chip sensor is digitized and fed to the compensation circuit, which can compensate for sensor offset, sensitivity, temperature drift, and non-linearity up to the 2nd order. The compensation coefficients can be written to the on-chip one-time programmable non-volatile memory (OTP) via a single-wire interface.
The JHM110X also features a 12-bit DAC, which conveniently outputs analog signals that are linear proportional to the differential input of the sensor. With an external JFET to form a regulated circuit, the JHM110X can operate directly with supply voltage up to 30V, making it convenient to meet the needs of many automotive, industrial and other applications.
Features
Power supply voltage(digital) | 2.7~5.5V |
Power supply voltage(analog) | 4.0~5.5V |
Power supply voltage(JFET) | 5.5~30V |
Operating temperature range | -40~125℃ |
Sampling rate | Up to 1 hz |
![1669710892833787.png 1669710858624.png](static/picture/1669710892833787.png)
High Accuracy: Up to ±0.1%FSO@-25~+85℃, and ±0.25%FSO@-40~+125℃ in digital output mode
Multiple Output Methods: Single-wire digital output,rail-to-rail analog voltage output, 0V~1V analog and PWM output
The analog preamplifier has a programmable gain of 4-gears, allowing the sensor signal input of<1mV/V, which can correct zero point deviations on a large range
Independently programmable high and low clipping levels
Built-in temperature sensing circuit, external temperature sensing component can also be used
Two-stage ADC structure: Conversion accuracy : 14-bit; Maximum update rate: ~1 kHz
Current consumption depends on programmed sample rate: 1.5 mA(typically)
Passed AEC-Q100 test
JHM110X Block Diagram
![1538119971718951.png image.png](static/picture/1538119971718951.png)
![1669711010349888.png 1669710979793.png](static/picture/1669711010349888.png)